Glue 5 Gr+2 Needles

Cyanoacrylate 4306 Plastics and elastomers 4306 is an instant cyanoacrylate adhesive of low viscosity.

It is specially formulated to carry out collages on difficult materials Applications:Allows the collage in seconds of a wide variety of plastics, elastomers, rubbers and metals.

Product Properties:Preparation:- The strength and durability of the joints depend on proper pre-treatment of the surfaces to be glued.

at at a minimum, glued surfaces should be cleaned with a dry degreaser (ADHECLEAN 7863) so as to remove any traces of dust, dirt, oils or grease.

Allow the surface to dry before applying adhesive.

Where possible, perform a mechanical abrasion to increase the grip and maintain the glue.

PRODUCT APPLICATION:- To perform best, surfaces will need to be clean, dry and grease-free.

– Apply the product to one of the two surfaces.

Assemble and squeeze without exaggeration Adhetech is available to recommend an adequate dosing system.

– POLYMERISE PRODUCT PROPERTIES:Value Properties – OHM/cm 1 x 10 specific resistance:16 – Maximum game 0.05 mm – Traction/shear resistance 10 – 26 N/mm2 – Softening T-160 to 170 degrees Celsius – Operating T-C -60C to 80C – Glass transition T, ASTM E228 122oC – Dielectric resistance, ASTM D149 27 KV/mm – Component Properties – Ethyle Cyanoacrylate Chemical Base – Moisture polymerization mechanism – Transparent Color – Liquid Apparance – Viscosity cPs ´25´C, RVT´1-60 rpm 20 – Relative density 1.05 – Flash Point >85 degrees Celsius – Preservation time 12 months.

100% Made in EUROPE.